Blodgett RE-42 - Manual

BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
EXTERIOR CONSTRUCTION
„ Stainless steel front, back, top, and sides
„ One set of independent interlocking doors.
„ Heavy chrome plated tubular steel door handle
„ Vitreous fiber insulation at top, back, sides, bottom and doors.
INTERIOR CONSTRUCTION
„ 29" x 41" x 28-1/4" (737mm x 1041mm x 718mm) oven compartment interior .
„ Porcelain-enameled steel baking compartment liner
OPERATION
„ 2 sets of 3 tubular-type heaters
„ Direct acting snap - action thermostats
„ Slide vent - each section
„ 2-1/3 HP blower motor operation, single speed
STANDARD FEATURES
„ Two 60 minute timers
„ Two year oven parts and one year labor warranty*
„ Five year limited door warranty*
* For all international markets, contact your local distributor.
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
„
Roll-In with pan racks
‰
RPR-20, with center divider and 10 racks
‰ Racks for pan rack L9
„ Electric Options
‰
Single phase wiring (208/240 volt)
‰ 2 speed motor (208/240 volt)
‰ Electric buzzer with mechanical timer (each)
„ Conventional Rack-type Options
‰
Stainless steel center divider
‰ Rack guides (set of 2)
‰ Racks (each)
‰ 6" (152mm) stainless steel legs
‰ Transport cart option (CTRE)
‰ Roll-In with dolly basket (DBRI-L)
MODEL RE-42
Electric Series Oven
RE-42
Project
Item No.
Quantity
Does not include rack, rack supports and center divider. Rolling equipment
must be selected from Available Options List.
All data is shown per oven section, unless otherwise indicated.