Blodgett BLCP - Manual (Page 36)

34
Operation
Programming a Product
Creating or Changing the Product Program Cooking
steps
11. Press the CHANGE STEPS key on the Edit Program
screen. The EDIT STEP screen is displayed.
NOTE: Skip this step if you are editing an existing
program and do not need to change the
program for any of the cooking steps.
12. If programming a new product be aware that the con-
trol will provide three steps automatically:
The 1st step is a preheat. Use the keys to the left and
right to set the desired preheat temperature and time.
The 2nd step is a stop. This step will sound an alarm
when the preheat step is complete alerting the opera-
tor that the oven is ready to accept product.
The 3rd step contains a default cook program that
you can modify as needed.
13. Press one of the top two keys to scroll the yellow box
to the 3rd step.
NOTE: If editing an existing program, use these
keys to select the step to be edited.
14. Press the green arrow down key to advance to the
EDIT STEP CHANGE FUNCTION screen.
15. The mode for the selected step appears in a yellow
box on the top row. Press the keys on the right and
left of the bottom row until the desired mode appears
inside the red box.
16. Use the keys to the side of the middle row to select
either add, delete or change
ADD - Use Add to add a new step. The green line
next to the current step indicates where the new step
will be inserted. Use the keys to the right and left to
move the green line if necessary.
DeLeTe - Use Delete to remove the current high-
lighted step.
CHAnGe - Use Change to modify the mode of the
current highlighed step.
17. You may have up to 10 cooking steps. Preheat, Stop
and Cool Down do not count as cooking steps. Once
all steps have been added, deleted or changed, press
the green up arrow key to return to the EDIT STEP
screen.
18. To edit the cooking parameters, scroll the yellow box
to the step to be edited.
19. Use the keys on the side to set the desired tempera-
ture, time, fan speed, vent postion and humidity (if ap-
plicable) for the selected step. You may also program
a core probe cook. See the directions for core probe
cooking.
20. When all steps are correct, press the green side ar-
row at the top left of the screen to return to the EDIT
PROGRAM screen.
saving the Product Program
21. Press the SAVE key to save your program to the oven
control.
exiting Program mode
22. Press the green side arrow at the top left of the screen
three times to return to the WORK menu.