Allied Telesis 9700 iMAP - Manual (Page 47)

Check management interfaces Uninstall the system
1-41
ATI 9700 - Installation Guide (Initial Installation of the ATI 9700)
Built on.............................. Thu 07/15/2004 at 11:14a
Built by.............................. ccadmin
Environment........................... ccbuild_R4.0_Customer_Build
Baseline.............................. Integration Latest
Boot ROM Build Name................... Telesyn 24G Central Fabric Controller
Boot Loader
Boot ROM Revision..................... 2.1.g.2
1.21.1.1 ATI 7700
Although control modules and service modules are shipped with release files already present in FLASH memory,
the release file should be compared with the latest software release files that are available from ATI or if this is a
replacement card, the current system loads. See section
1.24 for contact information.
Once a software release file is downloaded onto a network server, copy it to the Control Module FLASH file sys-
tem, load it into FLASH memory, make it the active load, and ensure that when the Control Module reboots this
latest load is always used. If this is a replacement card, make sure that the current system load is loaded into the
card. Also ensure the service module loads are obtained from the control module.
Details on the steps to do this are in section, File Management and Software Release Upgrade of the ATI User
Guide.
1.21.1.2 ATI 9700
The CFC24 in the 9700 comes equipped with optional Compact FLASH (CFLASH). Compact Flash (CFLASH)
is a removable memory card that will insert into the faceplate of CFC24 Control Module. This extra memory can
be used to store release load files, databases, and captured log files. Compact FLASH is a small portable card that
the user inserts into the CFC24 similar to FLASH on a digital camera or other device. See Section 8 of the ATI
User Guide for more information on CFLASH.
Refer to the ATI Component Specification for information on 9700 hardware and software compatibilities.
1.21.2 Check management interfaces
The ATI 9700 is now connected to a local terminal over an RS232 cable and can be queried. Refer to the ATI
User Guide which shows how to query the initial ATI 9700 status.
The ATI User Guide can then be used to configure the management interfaces.
For more information on system hardware refer to the ATI Component Specification.
1.22 Uninstall the system
To uninstall the system, reverse the installation procedures detailed above.