Allied Telesis AlliedView-EMS 3.11 QoS MANAGER - Manual (Page 86)

AlliedView™-EMS 3.11 QoS Manager User’s Guide Page 86 of 146
Property Name Description Valid Values
• APPLETALK
• IBM SNA
• IPX ETHII
• APPLETALK AARP
• SNMP
• IPV6 ETHII
• IPX 802.3
• ETHERTALK 2
• ETHERTALK 2 AARP
• IPX SNAP
• any
This can also be set by entering a 1-
to 5-byte hexadecimal value (00-
FFFFFFFFFF).
IP DSCP Specifies the Code Point bits of the
DiffServ field of an IP packet.
This can be set by entering one or
more integers from 0-63. Input can
be a comma separated list or a
range (specified as m-n) or a
combination of both. (e.g. 2, 4-7)
This value can also be set to "any".
IP Type of Service Specifies the value of the
precedence field within the TOS
(Type of Service) byte of an IP
packet.
Range: any, 0-7
IP Protocol Specifies a Layer 4 IP protocol of an
IP packet. For IPv6 packets, this
parameter matches against the Next
Header field of the IPv6 packet
header.
This can be set by selecting any of
the following values:
• TCP
• UDP
• ICMP
• IGMP
• OSPF
• any
This can also be set by entering an
integer from 0-255.
Source IP
Address
Specifies the source IP address
(either host or subnet) of an IP
packet.
This can be set by entering an IPV4
or IPV6 address using the following
format:
• IPv4 address[/mask] - IPv4 is
in dotted decimal notation,
mask is 0..32.
• IPv6 address[/mask] - IPv6 is
in colon separated hex digit