Allied Telesis AlliedView-EMS 3.11 QoS MANAGER - Manual (Page 137)

AlliedView™-EMS 3.11 QoS Manager User’s Guide Page 137 of 146
6.10 SwitchBlade Series
Topics:
• Classifiers
• Flow Groups
• Traffic Classes
• Policies
• Ports
• Scheduling
• Quick Setup
• Notes
6.10.1 Classifiers
6.10.1.1 QoS Information Window
Column Name Description
Classifier ID Lists the Rule ID of packet-matching rules available
6.10.1.2 Add/Modify Classifier
Property Name Description Valid Values
Rule ID
(cannot be
modified)
Uniquely identifies the packet-
matching rule
Range: 1-9999
Source VLAN Specifies the source VLAN that the
packet was associated with when
the packet was received by the
switch.
This can be set by selecting from a
list of available VLANs or "any".
Destination
VLAN
Specifies the destination VLAN that
the packet will be transmitted on.
This can be set by selecting from a
list of available VLANs or "any".
Ethernet Format This parameter specifies the
Ethernet encapsulation type of the
packet.
• 802.2
• EthII
• NetwareRaw
• SNAP
• any
Source IP
Address
Specifies the source IP address
(either host or subnet) of an IP
packet.
This can be set by entering an IP
Address in dotted decimal notation
with an optional mask
• NNN.NNN.NNN.NNN
• NNN.NNN.NNN.NNN/M