Allied Telesis AlliedView-EMS 3.11 QoS MANAGER - Manual (Page 57)

AlliedView™-EMS 3.11 QoS Manager User’s Guide Page 57 of 146
Property Name Description Valid Values
belonging to this Flow Group has.
Remark Priority Specifies whether the value of the
priority parameter is used to set the
egress queue selection for a frame
and also to replace the 802.1p
priority value in the frame, or just
to select the egress queue for the
frame.
• yes
• no
Type of Service Specifies the replacement value to
write in the Type of Service field of
IPv4 packets.
Range: none, 0-7
Move TOS to
Priority
Specifies whether or not the value
in the 802.1p priority field will be
replaced with the value in the ToS
priority field on IPv4 packets.
• yes
• no
Move Priority to
TOS Specifies whether or not the value
in the ToS priority field will be
replaced with the value in the
802.1p priority field on IPv4 packets.
• yes
• no
Classifier List Specifies a list of the Classifiers
currently assigned to this Flow
Group.
Select from a list of available
classifier IDs.
6.5.3 Traffic Classeses
6.5.3.1 QoS Information Window
Column Name Description
Traffic Class ID Lists the ID of Traffic Classes available
Description A brief description of the Traffic Class
Flow Groups List of the Flow Groups associated with this Traffic
Class
6.5.3.1 Add/Modify Traffic Class
Property Name Description Valid Values
Traffic Class ID
(cannot be
modified)
Specifies the unique identifier for
this Traffic Class. Range: 0-511
Description Specifies a brief description of the
Traffic Class.
To set this value, enter an
alphanumeric string from 1-15
characters.
Exceed Action Specifies the action to take if the
traffic classes maxbandwidth is
exceeded.
• drop
• remark
Exceed Remark Specifies the DSCP replacement Range: 0-63