Allied Telesis AT-RPS3000 - Manual (Page 59)

AT-RPS3000 Redundant Power Supply Installation Guide
59
3. Turn the chassis over.
4. Using a cross-head screwdriver, secure the two rack mount brackets
to the sides of the unit using the twelve bracket screws included with
the unit. The illustration shows the only way in which the brackets may
be positioned on the chassis.
Figure 37. Attaching the Equipment Rack Brackets
5. Have another person hold the unit in the equipment rack while you
secure it using standard screws (not provided).
Figure 38. Mounting the AT-RPS3000 Redundant Power Supply in an
Equipment Rack
2182
2151