Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 50)

Page 50
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
enable password
The enable password Global Configuration mode command sets a local password to control access to user and
privilege levels. Use the no form of this command to remove the password requirement.
Syntax
enable password [level level] password [encrypted]
no enable password [level level]
Parameters
•
password — Password for this level. (Range: 1 - 159 characters)
• level — Level for which the password applies. If not specified the level is 15. (Range: 1 - 15)
• encrypted — Encrypted password entered, copied from another device configuration. (Range: 32
caharacters in hexadecimal)
Default Configuration
No enable password is defined.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets a local level 15 password called ‘secret’ to control access to user and privilege levels. .
show accounting
The show accounting Exec mode command displays information about the accounting.
Syntax
show accounting
Parameters
This command has no arguments or keywords.
Default Configuration
There is no default configuration for this command.
Command Mode
Exec mode
Console(config)# enable password secret level 15