Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 231)

RMON Commands
Page 231
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays all RMON history group statistics.
The following table describes significant fields shown above:
show rmon history
The show rmon history User EXEC mode command displays RMON Ethernet history statistics.
Syntax
show rmon history index {throughput | errors | other} [period seconds]
Parameters
•
index — Specifies the requested set of samples. (Range: 1 - 65535)
• throughput — Indicates throughput counters.
• errors — Indicates error counters.
• other — Indicates drop and collision counters.
• seconds — Specifies the period of time in seconds. (Range: 0 - 4294967295)
console> show rmon collection history
Index Interface Interval Requested
Samples
Granted
Samples
Owner
----- --------- -------- --------- ------- -------
1 1/g16 30 50 50 CLI
2 1/g16 1800 50 50 Manager
F i e l d D e s c r i p t i o n
Index An index that uniquely identifies the entry.
Interface The sampled Ethernet interface
Interval The interval in seconds between samples.
Requested Samples The requested number of samples to be saved.
Granted Samples The granted number of samples to be saved.
Owner The entity that configured this entry.