Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 353)

VLAN Commands
Page 353
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures Ethernet port 1/g16 to discard untagged frames at ingress.
switchport general map macs-group vlan
The switchport general map macs-group vlan interface configuration mode command sets a mac-based
classification rule. Use the no form of this command to delete a classification.
Syntax
switchport general map macs-group group vlan vlan-id
no switchport general map macs-group group
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
MAC based VLAN rules cannot contain overlapping ranges on the same interface.
The priority between VLAN classification rules is:
• MAC based VLAN (Best match between the rules)
• PVID
The interface must be in General Mode to configure a MAC-based classification rule.
console(config)# interface ethernet 1/g16
console(config-if)# switchport general acceptable-frame-type tagged-only