Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 385)

802.1x Commands
Page 385
The following table describes the significant fields shown in the display:
dot1x auth-not-req
The dot1x auth-not-req Interface Configuration (VLAN) mode command enables unauthorized devices access to
the VLAN. Use the no form of this command to disable access to the VLAN.
Syntax
dot1x auth-not-req
no dot1x auth-not-req
Parameters
This command has no arguments or keywords.
Default Configuration
Access is enabled.
Field Description
EapolFramesRx The number of valid EAPOL frames of any type that have been received by
this Authenticator.
EapolFramesTx The number of EAPOL frames of any type that have been transmitted by
this Authenticator.
EapolStartFramesRx The number of EAPOL Start frames that have been received by this
Authenticator.
EapolLogoffFramesRx The number of EAPOL Logoff frames that have been received by this
Authenticator.
EapolRespIdFramesRx The number of EAP Resp/Id frames that have been received by this
Authenticator.
EapolRespFramesRx The number of valid EAP Response frames (other than Resp/Id frames)
that have been received by this Authenticator.
EapolReqIdFramesTx The number of EAP Req/Id frames that have been transmitted by this
Authenticator.
EapolReqFramesTx The number of EAP Request frames (other than Rq/Id frames) that have
been transmitted by this Authenticator.
InvalidEapolFramesRx The number of EAPOL frames that have been received by this
Authenticator in which the frame type is not recognized.
EapLengthErrorFramesRx The number of EAPOL frames that have been received by this
Authenticator in which the Packet Body Length field is invalid.
LastEapolFrameVersion The protocol version number carried in the most recently received EAPOL
frame.
LastEapolFrameSource The source MAC address carried in the most recently received EAPOL
frame.