Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 195)

Management ACL Commands
Page 195
Example
The following example denies all ports in the Access List called mlist.
management access-class
The management access-class Global Configuration mode command restricts management connections by
defining the active management Access List. Use the no form of this command to disable this restriction.
Syntax
management access-class {console-only | name}
no management access-class
Parameters
•
console-only — Indicates that the device can be managed only from the console.
• name — Specifies the name of the Access List to be used. (Range: 1 - 32 characters)
Default Configuration
If no Access List is specified, an empty Access List is used.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures an Access List called mlist as an active Access List.
show management access-list
The show management access-list Privileged EXEC mode command displays management access-lists.
Syntax
show management access-list [name]
Parameters
•
name — Specifies the name of a management Access List. (Range: 1 - 32 characters)
Default Configuration
This command has no default configuration.
console(config)# management access-list mlist
console(config-macl)# deny
console(config)# management access-class mlist