Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 275)

Spanning-Tree Commands
Page 275
exit (mst)
The exit MST Configuration mode command exits the MST configuration mode and applies all configuration
changes.
Syntax
exit
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example exits the MST configuration mode and saves changes.
abort (mst)
The abort MST Configuration mode command exits the MST configuration mode without applying the
configuration changes.
Syntax
abort
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Instance Vlans Mapped State
-------- ------------ -------
0 1-9,21-4094 Enabled
1 10-20 Enabled
console(config) # spanning-tree mst configuration
console(config-mst) # exit