Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 124)

Page 124
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
no gvrp registration-forbid
Default Configuration
Dynamic registration of VLANs on the port is allowed.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example forbids dynamic registration of VLANs on Ethernet port 1/g6.
clear gvrp statistics
The clear gvrp statistics Privileged EXEC mode command clears all GVRP statistical information.
Syntax
clear gvrp statistics [ethernet ethernet | port-channel port-channel-number]
Parameters
•
ethernet — A valid Ethernet port. (Full syntax: unit/port)
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example clears all GVRP statistical information on Ethernet port 1/g6.
show gvrp configuration
The show gvrp configuration User EXEC mode command displays GVRP configuration information, including
timer values, whether GVRP and dynamic VLAN creation is enabled, and which ports are running GVRP.
console(config)# interface ethernet 1/g6
console(config-if)# gvrp registration-forbid
console# clear gvrp statistics ethernet 1/g6