Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 342)

Page 342
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
Command Mode
User EXEC mode
User Guidelines
By default, a More prompt is displayed when the output contains more lines than can be displayed on the screen.
Pressing the Enter key displays the next line; pressing the Spacebar displays the next screen of output. The data-
dump command enables dumping all output immediately after entering the show command.
This command is relevant only for the current session.
Example
This example dumps all output immediately after entering a show command.
show history
The show history User EXEC mode command lists the commands entered in the current session.
Syntax
show history
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
The buffer includes executed and unexecuted commands.
Commands are listed from the first to the most recent command.
The buffer remains unchanged when entering into and returning from configuration modes.
Example
The following example displays all the commands entered while in the current Privileged EXEC mode.
console> terminal datadump
console# show version
SW version 3.131 (date 23-Jul-2009 time 17:34:19)
HW version 1.0.0
console# show clock
15:29:03 Jun 17 2009