Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 255)

SNMP Commands
Page 255
show snmp engineid
The show snmp engineID Privileged EXEC mode command displays the ID of the local Simple Network
Management Protocol (SNMP) engine.
Syntax
show snmp engineID
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SNMP engine ID.
show snmp views
The show snmp views Privileged EXEC mode command displays the configuration of views.
Syntax
show snmp views [viewname]
Parameters
•
viewname — Specifies the name of the view. (Range: 1 - 30)
Default Configuration
This command has no default configuration.
IP Address Management station IP Address.
Trap-Rec-Address Targeted Recipient
Trap-Rec-Community Statistics sent with the notification operation.
Version SNMP version for the sent trap 1 or 2.
console# show snmp engineID
Local SNMP engineID: 08009009020C0B099C075878