Allied Telesis AT-S95 CLI (AT-8000GS Series) - Manual (Page 301)

Syslog Commands
Page 301
logging file
The logging file Global Configuration mode command limits syslog messages sent to the logging file based on
severity. Use the no form of this command to cancel using the logging file.
Syntax
logging file level
no logging file
Parameters
•
level — Specifies the severity level of syslog messages sent to the logging file. Possible values:
emergencies, alerts, critical, errors, warnings, notices, informational and debugging.
Default Configuration
The default severity level is errors.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example limits syslog messages sent to the logging file based on severity level alerts.
clear logging file
The clear logging file Privileged EXEC mode command clears messages from the logging file.
Syntax
clear logging file
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
console(config)# logging file alerts