Allied Telesis AT-GS950/48 - Manual (Page 60)

Chapter 2: System Configuration
60
System Log Configuration
The System log is designed to monitor the operation of the AT-GS950/48
switch by recording the event messages it generates during normal
operation. These events may provide vital information about system
activity that can help in the identification and solutions of system
problems.
To configure the System log, perform the following procedure:
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.
2. From the System folder, select System Log Settings.
The System Log Configuration Page is displayed. See Figure 22.
Figure 22. System Log Configuration Page