Allied Telesis AT-GS950/48 - Manual (Page 29)

29
Chapter 2
System Configuration
This chapter provides procedures to configure basic system parameters
for the AT-GS950/48 switch and contains information for the following
sections:
 “System Management Information” on page 30
 “Configuration of IPv4 Address, Subnet Mask and Gateway Address”
on page 32
 “IPv6 System Configuration” on page 34
 “IPv6 Neighbor Configuration” on page 36
 “IP Access List Configuration” on page 40
 “User Name and Password Configuration” on page 42
 “User Interface Configuration” on page 45
 “System Time” on page 47
 “SSL Settings” on page 50
 “DHCP and ATI Web Discovery Tool” on page 52
 “DHCP Client Configuration” on page 53
 “DHCP Auto Configuration” on page 56
 “System Information Display” on page 57
 “System Log Configuration” on page 60
Note
To permanently save your new settings or any changes to the
configuration file, select Save Settings to Flash from the main
menu on the left side of the page.