Allied Telesis AT-GS950/48 - Manual (Page 121)

AT-GS950/48 Web Interface User Guide
121
Port Mirroring Configuration
To configure Port Mirroring, perform the following procedure:
1. Select the Bridge folder.
The Bridge folder expands.
2. From the Bridge folder, select Mirroring.
The Mirroring Page is displayed. See Figure 41.
Figure 41. AT-GS950/48 Mirroring Page
3. Click the pull-down menu next to the Status field and select one of the
following choices:
Enabled - This parameter activates the Port Mirroring feature, and
the rest of the configuration parameters become active on the
page.
Disabled - This parameter de-activates the Port Mirroring feature,
and the rest of the configuration parameters become inactive on
the page.
4. Click Mirroring Port and from the pull-down menu, select the port.
5. For the source port, select the port(s) whose ingress, egress, or both
ingress and egress traffic you want to monitor.
To select all ports for an ingress or egress, click the All button. (The
All button changes to Clear.)
To de-select all ports for an ingress or egress, click the Clear button.
A check in a box indicates the Ingress or Egress traffic for a port has
been selected.