Allied Telesis AT-GS950/48 - Manual (Page 165)

AT-GS950/48 Web Interface User Guide
165
Note
Before you assign a port as a member of a port-based VLAN, you
must create the port-based VLAN by following the steps defined in
“Port-Based VLAN Configuration” on page 174.
5. Click Apply.
6. If you want to restore the port assignment before saving the
configuration, click Restore.
Note
Once the VLAN assignment has been saved by clicking first on the
Apply button and then saving the configuration, the Restore button
will not be active for those port assignments.
7. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.