Allied Telesis AT-GS950/48 - Manual (Page 176)

Chapter 13: Virtual LANs
176
4. In the VLAN Action column, click Modify next to the VLAN that you
want to change. The Modify Port-Based VLAN page appears. See
Figure 63 on page 176.
Figure 63. Modify Port-Based VLAN Page
5. Modify name or port assignments as needed. You cannot modify the
Index number from this page.
6. Click Apply.
7. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.
Delete a Port-
Based VLAN
To delete a port-based VLAN, perform the following procedure:
1. From the main menu on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Bridge folder, select VLAN.
The VLAN folder expands.
3. From the VLAN folder, select Port-Based VLAN.
The Port-Based VLAN Page is shown in Figure 62 on page 175.
4. In the VLAN Action column, click Delete next to the VLAN that you
want to delete.
Note
You cannot delete the Default VLAN which has a VID of 1.
5. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.