Allied Telesis AT-GS950/48 - Manual (Page 221)

AT-GS950/48 Web Interface User Guide
221
SNMP Traps
A Host IP address is used to specify a management device that needs to
receive SNMP traps sent by the switch. This IP address is associated with
the SNMP Version and a valid Community Name in the Host table of the
switch.
Use the following sections to create, modify, and delete trap host table
entries:
 “Create Trap Host Table Entry,” next
 “Modify a Trap Host Table Entry” on page 222
 “Delete a Trap Host Table Entry” on page 223
Create Trap Host
Table Entry
Use the following procedure to create a trap Host table entry:
1. From the main menu on the left side of the page, select the SNMP
folder.
The SNMP folder expands.
2. From the SNMP folder, select Trap Management.
The Trap Management Page is displayed. See Figure 81.
Figure 81. Trap Management Page
3. Enable trap management by selecting the radio button next to
Enabled at the top of the page. (By default, trap management is
enabled.)
4. Click Apply.