Allied Telesis AT-GS950/48 - Manual (Page 393)

393
Appendix B
AT-GS950/48 Default Parameters
Table 10 lists the factory default settings for the AT-S116 Management
software on the AT-GS950/48 switch. The Parameters reflect the fields
found on each web page.
Table 10. AT-S116 Management Software Default Settings
Parameter
AT-GS950/48
Default Setting
Specifications
System/Management
System Description AT-GS950/48 -
System Object ID 1.3.6.1.4.207.1.4.167
1.3.6.1.4.207.1.4.166
1.3.6.1.4.207.1.4.165
1.3.6.1.4.207.1.4.167
1.3.6.1.4.1.207.1.4.203
1.3.6.1.4.1.207.1.4.199
1.3.6.1.4.1.207.1.4.204 -
System Name none 0 - 15 characters
System Location none 0 - 30 characters
System Contact none 0 - 30 characters
System/IP Setup
IP Address 192.168.1.1 IPv4 address in xxx.xxx.xxx.xxx hex format;
except 127.0.0.1
Subnet Mask 255.255.255.0 IPv4 address in xxx.xxx.xxx.xxx hex format;
except 127.0.0.1
Default Gateway
Address 0.0.0.0 IPv4 address in xxx.xxx.xxx.xxx hex format;
except 127.0.0.1
DHCP Mode (Client) Disabled Enabled/Disabled
System/IP Access List