Allied Telesis AT-GS950/48 - Manual (Page 265)

AT-GS950/48 Web Interface User Guide
265
snapshot of RMON statistics. Different ports can have different
numbers of buckets. The range is 1 to 50 buckets.
Interval: This parameter specifies how frequently the switch takes
snapshots of the port’s statistics. The range is 1 to 3600 seconds
(1 hour). For example, if you want the switch to take one snapshot
every minute on a port, you specify an interval of 60 seconds.
Owner: This parameter is used to identify the person who created
an entry. It is primarily intended for switches that are managed by
more than one person and is an optional field.
4. Once you have configured the parameters, click Add.
Your entry appears in the table at the bottom of the page. See Figure
105.
Figure 105. History Control Configuration Example
5. If you want to configure additional RMON histories for other ports,
repeat Step 3 and Step 4.
6. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.