Allied Telesis AT-GS950/48 - Manual (Page 252)

Chapter 18: Access Control Configuration
252
You can also use the Delete All button to delete all entries from the
policy table.
4. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.
View Specific
Classifier Details
To view the details of the packet settings for a specific policy, perform the
following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select Policy Settings.
The Policy Settings page is displayed. See Figure 94 on page 249 for
an example of an entry in the Policy Settings page.
3. Click the Detail button under the Classifier column for classifier details
of the policy you want to view. The Classifier Detail page appears. See
Figure 96.
Figure 96. Classifier Detail Page
For a description of the displayed settings, refer to “Create a Policy” on
page 245.