Allied Telesis AT-GS950/48 - Manual (Page 180)

Chapter 13: Virtual LANs
180
Private VLAN Configuration
You can create, modify, and delete private VLANs by following the
procedures in the following sections:
 “Enable or Disable Private VLAN”
 “Create a Private VLAN” on page 181
 “Modify a Private VLAN” on page 182
 “Delete a Private VLAN” on page 182
For more information on Private VLANs, refer to “Private VLAN Overview”
on page 162.
Enable or Disable
Private VLAN
To enable or disable private VLAN, perform the following procedure:
1. From the main menu on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Bridge folder, select VLAN.
The VLAN folder expands.
3. From the VLAN folder, select Private VLAN.
The Private VLAN Page is displayed. See Figure 66 for a partial view
of this page.