Samsung SCH-U660CNAVZW - Manual (Page 95)

Tools 89
2. Press the Right Soft Key Settings to configure:
• TXT Msg Readout: When enabled, the phone reads text messages
when you open them.
• Confirm Choices: Control whether Voice Commands asks you to
confirm a command. Choose Automatic, Always Confirm, or
Never Confirm.
• Sensitivity: Set the sensitivity of speech recognition. Choose More
Sensitive if Voice Commands often misses commands, Automatic
for default sensitivity, or Less Sensitive.
• Adapt Voice: Train speech recognition to your voice.
• Prompts: Choose the type of prompts Voice Commands gives you:
– Mode: Choose the type of prompts, from Prompts (voice prompts, as
by default), Readout + Alerts (reads out each screen and alert),
Readout (reads out each screen), or Tones Only (plays only tones to
prompt you for commands).
– Audio Playback: Set playback location to Speakerphone or Earpiece.
– Timeout: Control how long Voice comands listens for a command.
• Key Setting: Choose how to launch Voice Commands, from Voice
Key Only (press the Voice Commands/Flashlight Key), or Voice
Key/Headset (Press the Voice Commands/Flashlight Key, or insert
a headset), or Voice Key/Flip (Press the Voice Commands/
Flashlight Key, or open the phone).
• About: View information about Voice Commands.
Tip: Press the Left Soft Key Info for descriptions of Voice Commands settings.
Calculator
You can perform calculations, including addition, subtraction,
multiplication and division using your phone.
Normal
1. From the Home screen, press MENU ➔ Settings
& Tools ➔ Tools ➔ Calculator ➔ Normal.
2. Enter the first number in your equation, up to 8 digits.
3. Use the Directional Key to enter an operator:
• UP: [ + ] Addition
• DOWN: [ - ] Subtraction
• RIGHT: [ x ] Multiplication
• LEFT: [ ÷ ] Division
While entering equations, you can use these options:
• Press the Left Soft Key Clear or the Clear Key to
delete entries.
• Press the Right Soft Key Operator to enter Left [ ( ] and
Right [ ) ] parentheses or raise a number by a power.
• Press after a number to change the sign.
• To enter a decimal point, press .
4. Press OK to perform the calculation.