Samsung SPH-M910CAAVMU User Manual
Page 90
Connections 83
To pair your device with another Bluetooth device:
1.
Verify your Bluetooth is active.
2.
From the Bluetooth settings page, tap Visible.
Your device must be visible to successfully pair
with an external device.
3.
Tap Scan devices. (Your device will display a list
of discovered in-range Bluetooth devices,
4.
Tap a device from the list to initiate pairing.
Note: Pairing between two Bluetooth devices is a one-time
process. Once a pairing is created, the devices continue
to recognize their partnership and exchange information
without having to re-enter a passcode again.
5.
Enter the passkey or PIN code and tap Done
➔
OK.
6.
The external device will then have to also
accept the connection and enter your device’s
PIN code.
Once successfully paired to an external device,
appears within the Status area.
Note: Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetooth-
compatible devices.
To disconnect a paired device:
Disconnecting a paired device breaks the connection
between the device and your Samsung Intercept™,
but retains the knowledge of the pairing. At a later
point when you wish to reconnect the device, there is
no need to setup the connection information again.
1.
Verify your Bluetooth is active.
2.
From the Bluetooth settings page, touch the
previously paired device (from the bottom of
the page).
3.
Tap OK to confirm disconnection.
– or –
From the Bluetooth settings page, touch and
hold the name of the previously paired device,
and select Disconnect.
Note: Disconnections are manually done but often occur
automatically if the paired device goes out of range of
your Samsung Intercept™ or it is powered off.
To delete a paired device (unpair):
Deleting a device from your list removes its
“connection record” and upon reconnection would
require that you re-enter all the previous pairing
information.
1.
Verify your Bluetooth is active.