Dtmf tones – Samsung SPH-L900TSASPR User Manual
Page 87
Settings
73
provided with your TTY phone, contact your TTY phone manufacturer to purchase the
connector cable.
To turn TTY Mode on or off:
1. Press
, tap
, and then tap
> Call settings.
2. Tap TTY mode.
3. Tap TTY Off to turn off TTY mode.
– or –
Tap any of the following to enable the feature:
TTY Full, TTY HCO, or TTY VCO.
To access the state Telecommunications Relay Service (TRS) for assistance with TTY calls:
►
Tap
to reach TRS Communications Assistant.
For additional information about Sprint Relay Services and TTY compatibility, call Sprint Relay
Customer Service at 800-676-3777 or vis
For additional technical support you may call
, or access the following website:
Note: In TTY Mode, your phone will display the TTY access icon. If TTY mode is enabled, the
audio quality of non-TTY phones connected to the headset jack may be impaired.
Warning!
911 Emergency Calling
Sprint recommends that TTY users make emergency calls by other means,
including Telecommunications Relay Services (TRS), analog cellular, and
landline communications. Wireless TTY calls to 911 may be corrupted when
received by public safety answering points (PSAPs), rendering some
communications unintelligible. The problem encountered appears related to TTY
equipment or software used by PSAPs. This matter has been brought to the
attention of the FCC, and the wireless industry and the PSAP community are
currently working to resolve this.
DTMF Tones
DTMF tones are the sounds you hear when pressing each number a touch-tone phone. The
DTMF tones feature allows you to set the length of time that you hear each tone when tapping
a number on the phone’s keypad.
1. Press
, tap
, and then tap
> Call settings.