Samsung SPH-L900TSASPR - Manual (Page 197)

Web and Data 183
Press and tap > Settings > Wi-Fi. The On/Off slider displays ON when ►
Wi-Fi is active.
Tip: You can also turn Wi-Fi on and off through the Notifications panel. Drag the Notifications
panel down and tap Wi-Fi to enable or disable Wi-Fi.
Note: Wi-Fi networks are self-discoverable, which means no additional steps are required for
your phone to connect to a Wi-Fi network. It may be necessary to provide a user name
and password for certain closed wireless networks.
To connect to a Wi-Fi network:
1. Press and tap > Settings > Wi-Fi.
2. The network names and security settings (Open network or Secured with xxx) of
detected Wi-Fi networks are displayed.
 When you select an open network, you will be automatically connected to the
network.
 When you select a secured network, you will need to enter the wireless password to
connect to the network. Enter the password and tap Connect. You can use the
show password option to display the password as you enter it.
To manually add a new network connection:
1. Tap Add Wi-Fi network.
2. Enter the Network SSID. This is the name of your Wi-Fi network.
3. Tap the Security field and select a security option. This must match the current security
setting on your target network.
 If you're adding a network secured by a password, enter it in the Password field.
4. Tap Save to store the new information and connect to the Wi-Fi network.
Note: The next time your phone connects to a previously accessed or secured wireless
network, you are not prompted to enter the wireless password again, unless you reset
your phone back to its factory default settings.
To manually scan for a Wi-Fi network:
1. Press and tap > Settings > Wi-Fi.
2. Tap Scan.