Samsung SPH-M580ZKASPR - Manual (Page 164)

150 3B. Web and Data Services
2. To manually add your new network connection:
Ⅲ Touch Add Wi-Fi network .
Ⅲ Enter the Network SSID. This is the name of your
Wireless Access Point.
Ⅲ Tap the Security field and select a security option.
This must match the current security setting on
your target WAP.
Ⅲ If secured, you will also need to enter your WAP’s
password. The
show password option , reveals the
password as you type it vs only showing asterisks
(****).
Ⅲ Tap Save to store the new information and
connect to your target WAP.
To manually scan for a Wi-Fi network:
1. Press > and tap >
Wireless & networks > Wi-Fi settings.
2. Press and tap Scan .
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status
at a glance:
– Wi-Fi is connected and active.
– Wi-Fi active but there is a communication
issue with the target Wireless Access Point
(WAP).
Using the Wi-Fi Settings Menu
The Wi-Fi settings - Advanced menu allows you to set
up many advanced and IP settings for your device’s
Wi-Fi service, including:
ⅷ Setting your Wi-Fi sleep policy
ⅷ Entering Proxy and Port Information
ⅷ Viewing your device’s MAC Address
ⅷ Configuring use of Static IP
To access the Bluetooth Settings menu:
1. Press > and tap >
Wireless & networks > Wi-Fi settings .
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
Note: Wi-Fi must be turned on in order to scan for a network.