Wesley BC-620-4CA - Manual (Page 75)

Curtis 1234/36/38 Manual,
OS
11 71
2 3 J U LY 2 0 0 8 D R A F T
4a — MONITOR MENU
Monitor Menu: VEHICLE
DISPLAY
VARIABLE RANGE DESCRIPTION
Vehicle Speed -327.7–327.7 Vehicle speed, in units of MPH or KPH,
Vehicle_Speed -32768–32767 depending on the setting of the Metric
Units parameter (see Program » Vehicle
menu, page 58).
For accurate speed estimates, the
Speed to RPM parameter must be set
correctly (page 58).
Vehicle Odometer 0–42949672.9 Vehicle distance traveled, in units of miles
Vehicle_Odometer 0–4294967295 or km, depending on the setting of the
Metric Units parameter (page 58).
For accurate distance measurements,
the Speed to RPM parameter must be set
correctly (page 58).
Vehicle Acceleration 0–10 g Vehicle acceleration. The Speed to RPM
Vehicle_Acceleration 0–1000 parameter must be set correctly for ac-
curate measurement.
Time to Speed 1 0–128 sec Time taken for the vehicle to go from zero
Time_to_Capture_Speed_1 0–32000 rpm to the programmed Capture Speed 1
(see Program
» Vehicle menu, page 58)
during its most recent such acceleration.
Time to Speed 2 0–128 sec Time taken for the vehicle to go from zero
Time_to_Capture_Speed_2 0–32000 rpm to the programmed Capture Speed 2
(see Program
» Vehicle menu) during its
most recent such acceleration.
Time Between Speeds 0–128 sec Time taken for the vehicle to go from
Time_Between_Capture_Speeds 0–32000 programmed Capture Speed 1 to pro-
grammed Capture Speed 2 (see Pro-
gram
» Vehicle menu, page 58) during its
most recent such acceleration.
Time to Dist 1 0–128 sec Time taken for the vehicle to travel from
Time_to_Capture_Dist_1 0–32000 zero rpm to the programmed Capture
Distance 1 (see Program
» Vehicle menu,
page 58) during its most recent such trip.
For accurate distance measurements,
the Speed to RPM parameter must be set
correctly (page 58).
Time to Dist 2 0–128 sec Time taken for the vehicle to travel from
Time_to_Capture_Dist_2 0–32000 zero rpm to the programmed Capture
Distance 2 (see Program
» Vehicle menu)
during its most recent such trip.
For accurate distance measurements,
the Speed to RPM parameter must be set
correctly (page 58).
Note: All vehicle
calculations assume
no tire slippage.
☞