beautypg.com

Campbell Scientific HydroSense II Support Software User Guide User Manual

Page 79

background image

Section 8. Operating System Updater

If there is a Bluetooth error while transferring the operating system, the error
will be shown below the progress bar. The HydroSense II will turn off, and the
operating system transfer will fail. At this point, the HydroSense II will not
power normally on as it has an incomplete operating system. The device can
still be powered on in “boot loader” mode. In event of an error, repeat the
operating system transfer procedure. If the error continues, please contact
Campbell Scientific.

Once the transfer is complete, the HydroSense II display will power off and the
update facility will display a message indicating the transfer was successful.
The HydroSense II display can now be powered normally.

Before storing data points on the device, perform a Synchronise with the
HydroSense II. This will upload the zones stored on the PC to the HydroSense
II, as the device zones would have been cleared during the upgrade process.

8-7