2 6040-gps –switch-on and switch-off, 1 switch on, 2 instrument switch- off – Flytec 6040 * User Manual
Page 6: 6040-gps –switch-on and switch-o, Switch on, Instrument switch- off, Operation manual flytec 6040 gps
Operation Manual FLYTEC 6040 GPS
4
1.2 6040-GPS –Switch-on and switch-off
1.2.1 Switch
On
The instrument is switched-on by pressing the On/Off key
.
By use of the
▲ or ▼ keys the required language may be selected.
The language as selected shall automatically be enabled again upon
next switch-on
After confirmation, the idsplay switches for 15 sec to the switch-on
Display with the following information:
- Type of instrument and serial number
- Software (Firmware) Version
- Time,
Date
- Battery
Status
1.2.2 Instrument Switch- off
For switch-off press the On/Off key as long until the question:
Switch-off?
Press OK
Is prompted on the screen.
Again, to prevent unintentional switch-off, also this action needs to
be acknowledged by pressing the OK key !
1. Following OK acknowledgement the instrument is immediately
switched-off, in case no flight recording has been made.
2. Following an active flight recording, the readout screen Flight -
Analysis is displayed before switch-off. If you want to quit the
flight analysis display, press shortly the OK or ON/OFF key,
the instrument will then be switched-off immediately.
Init EEPROM
English
↑
Deutsch
Francais
Espagñol
Italiano
Magyar
↓
---------------------------------
Bat Bank 1: xx %
Bat Bank 2: xx %
switch off ?
Ausschalten?
Arrêter ?
Press Ok
Drücke OK
Appuyer sur OK
FlyTEC AG
6040
Sn
8642
V
ersion 3. 02 16.05.08
Date
T
ime(U
T
C)
12.06.09
13:29
ba
t
t
e
r
y
c
h
e
c
k
f
o
r 3
s..
B
a
t
t
e
r
y
B
a
n
k
1
:
8
8
%
B
a
t
t
e
r
y
B
a
n
k
2
:
9
0
%
TT34 Adress: 6475
Owner: not set
Balloon Typ: not set
OK