Flytec 6040 * - Manual (Page 13)

Operation Manual FLYTEC 6040 GPS
11
1.7 User defined data fields
The main display page contains 3 pages each which are stepped forward by using the ► key.
Thus it is possible to display almost all of the following measuring values in the right context.
The page number is shown next to the battery-charge state readout as P1 .. P3.
page
displlay remains empty
Time Time of day 23
Flight time Flight time since take-off 40
Vario Digital Vario 21
Altitude 1 m
Absolute altitude 18
Altitude 1 ft Absolute altitude in ft 18
Altitude 2 Reference altitude, may be set to 0 user-defined 19
GPS altitude GPS altitude 19
Altitude 3 Sum Cumulated gain in height during the flight 19
FL (ft) Flight level in feet. Not alterable 18
QNH hPa Air pressure in Hektopascal 18
QNH inHg Air pressure in inch of Mercury 18
Gnd Speed
Speed over Ground * ( = GS) 23
Air Speed Vane wheel sensor air speed (Option) 23
Track
Flight direction (Course)* 27
Bearing WP Direction to selected Waypoint * 27
CrossTrack Error Perpendicular distance to the active leg of a route 33
Dist WP Distance to selected Waypoint * 30
Dist t End Distance to end of route 31
Dist Start Distance from take-off position 32
Dist Cyl Distance to WP cylinder 30
Dist CTR Distance to next Air space 34
Up Alert
Upper Altitude Alert 20
Low Alert Lower Altitude Alert 20
Temperatur Instrument
Temperature 23
Env. Temp Envelope Temperature 24
Max. Env. Max. Envelope Temperature 25
SMS p/t
Number of SMS Pending/transmitted (option) 46
If nothing is changed after having selected a field, the instrument returns to normal function
after 10 sec. and the previous display is shown again.