Flytec 3040 QNH correction - Manual

QNH
CORRECTION
QNH SET
DISPLAY
QNH SET
DISPLAY
A LT/ QNH Set
DISPLAY
RUN
PRESS ONCE
PRESS AT ONCE
PRESS 4 sec.
RANGE -30.0/+30.0 RANGE -300/+300 with arrow keys Up / Down
(10 STEPS = 1hPa) (10 STEPS = 1hPa) change the correction value
SOFTWARE 59418
SOFTWARE 39243
ONLY FOR 3040
QNH-CORRECTION
PRESS ONCE
e.g. Correction from -1.2 to -2.2 ( -10 Steps) = 1 hPa = ALTI Correction of +26ft
e.g . Correction from -12 to -22 ( -10 Steps) = 1 hPa = ALTI Correction of +26ft
(Alt/ QNH is blinking)
QNH-Correction-E-All.pdf