Flytec 6040 * - Manual (Page 16)

Operation Manual FLYTEC 6040 GPS
14
1.8.1.3 Instrument Settings
Term Denotation more Factory setting
Info
Display contrast Range 0.. 100 % - 50 %
TT34 Number Serial nb. Temperatur transitter 24
Battery type Battery type. Selectable between Alcaline or
NiMH 44 Alcaline
Time zone Difference to UTC; also 0.5h time zones are
adjustable 23 -2
Units Meter or feet; km/h or mph or knots.
Temp. in °C or °F - m ; km/h ; °C
Coordinates format dd'mm.mmm or dd.ddddd or dd'mm"ss, UTM
or Swiss-Grid dd'mm.mmm
Pressure sensor
Correction Due to this setting it is possible to remediate
a possible ageing of the
pressure sensor. As monitoringthe QNH
value is applied. If you know the QNH value
of a certain location (e.g. airfield altitudee)
the altitude must be concordant to the
effective altitude. 1hPa corresponds at 500m
to approx. 8m. - 0 hPa
User Fields 7
Language Selection possible from 5 different
languages 4 English
Bluetooth Only active when the SW Package Bluetooth
is activated. Here is made the Pairing of
Bluetooth interface for the SMS function. 46 pls see separate
documentation
SMS Only active when the Bluetooth and SMS
SW Package is activated. Here is entered
the target telephone number as well as the
Mode. 46 pls.see separate
documentation
Opt. Software Here additional SW funktions (Packages)
are activated. For this purpose the
relevant manufacturer’s Code is required. 46
Factory settings Disabled zone 14
1.8.1.4 Factory settings
This setting item, which is not accessible to the pilot, contains all basic settings of the instrument. In
particular, both the sensor specific parameters and all calibration data are
located here.