Flytec 6040 * - Manual (Page 56)

54
Technisches Manual Flytec 6040 Anhang
14 Technical Data
Altimeter: max. 11000 m Scale 1m
Variometer: analogue ± 8 m/s Scale. 0,2 m/s
digital ± 100 m/s Scale 0,1 m/s
Speed
Pitot pressure
0 - 100 km/h
Wind wheel 0 up to 120 km/h (Sensor in option)
Waypoints: 200 WP’s
Routes: 20 Routes with max. 30 WP’s each
Max. recording time: 48 hrs. Flight time at 10 s recording interval
max. 291 hrs. at 60 s recording interval
Restricted Areas 300 CTR’s
Number of Tracklog-points: 21 000
Number of recorded flights: 100
Dimensions: 178 x 95 x 40 mm
Weight: 425 grammes (without harness)
Power supply: 2 or 4 pieces NiMH Accum. or Alkaline batteries AA, 1.5V
Battery operation time: > 20 hrs. per Bank, i.e >40h
Battery charger: Input:100..240 VAC 50-60Hz 260mA
Output: 12V= 1A 12VA MAX
Data memory and transfer according to the IGC format
Screen resolution
76800 Pixel / 320 x 240Pixel ( = 1/4 VGA )
Operating temperature -15 °C ... +50 °C
Bracket System included
Technical data may be altered without prior notification at anytime. Software upgrades
can be made via Internet by downloading the latest firmware version from our homepage
via user’s PC.
15 Approval / Conformity
Europa
Producer:
Flytec AG
Country of manufacturing: Schweiz
Typ: 6040 / Compeo+ Kennzeichnung:
The instrument was tested according to following Standards and is compliant to the required Standards.
• ETSI EN 301 489-1 V1.6.1/ETSI EN 301 489-3 V1.4.1
• IEC/EN 60950-1:2006: Safety Europe.
The instrument is to be charged exclusively with the charger unit Sincho SW12-120E 12V=1A,
wihich is included in the scope of supply.
USA /Canada
according 47CFR15, ICES-003, Issue 4
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.