MagTek DynaPro Mini Programmer's99875629 - Manual (Page 41)

3 - Command Set
DynaPro Mini| PIN Encryption Device | Programmer’s Reference (Commands)
Page 41
Bit 7 6 5 4 3 2 1 0
Byte 2 Key Status, if Info ID < 0x80:
0 = Empty (default)
1 = OK
2 = Exhausted
Key Status, if Info ID = 0x80:
0 – 5 = KCV type (see Table 3-18)
Byte 3 Data length (see Table 3-18); default value is 0
Byte
4..63 Block data
Table 3-18 – Block Data Returned for Report 0x0E
Info ID Key
Status
Data
length
Data Description
0x00 1 lbllen* Auth key label If auth key exists
0x01,0x02 2 20 KSN If no more keys
0x01 1 20 KSN PIN key
0x02 1 20 KSN MSR key
0x03 1 <=59 SN & subject’s DN** If PIN cert exists
0x04 1 <=59 SN & subject’s DN** If MSR cert exists
0x05 1 <=19 Label and KCV If auth key exists
0x06 1 <=19 Label and KCV If fixed key exists
0x07 1 <=59 List of 2 byte items
(type,MID) ID list of installed MID secrets
0x08 1 12 Customer ID,
(4 byte integer)
Signing Sequence
Number,
(4 byte integer)
Upgradability Options,
(4 byte integer) 0x0000000 is Generic Customer
Signing Sequence typically starts
at 0x00000000 and must advance
with each upgrade.
Upgradability values:
0x00000000 – Generic Only
0x00000001 – Specific Only
0x00000002 – Generic or
Specific
0x09 1 <=19 Label and KCV Acquirer Master Key
0x10 1 4 x 3 4 slots for bitmap data
[status + 2 bytes CRC]
status: 0 = not loaded
1 = loaded Bitmap data status and its CRC
0x20 -
0x29 - - - RESERVED