Outback Power Systems FLEXpower ONE One Fully Pre-Wired Single Inverter System Installation Manual - Manual (Page 53)

Specifications
900-0095-01-00 Rev A
51
Electrical Specifications, 230 Vac/50 Hz Models
Product Name FP1-5 FP1-6
Inverter Model VFX3024E VFX3048E
Output Waveform True Sine Wave
Nominal 24 Vdc 48 Vdc
Battery
Voltage
Operating Range 20-30 Vdc 40-60 Vdc
Recommended Minimum Battery Capacity 200 Amp-hours 100 Amp-hours
For Models with FM80 Charge Controller:
Maximum PV Array Wattage 2000 Wdc
STC
4000 Wdc
STC
PV Input Voltage Range 25-150 V
OC
50-150 V
OC
PV Operating Voltage Range 25-145 Vdc 50-145 Vdc
PV Maximum Open Circuit Voltage 150 V
OC
including local temperature correction factor
PV Maximum Short Circuit Current 64 A I
SC
Protection
AC and DC Surge Protection MOV Current Diversion with LED Warnings
PV Ground Fault Protection 80 Adc Breaker (Detection >0.5 A)
For Models with FLEXnet DC Battery Monitor:
State of Charge Display 5-LED Bar Graph, or 1% - 100% scale, using MATE2
Battery Capacity Range 100 to 10,000 Amp-hours
Current Resolution 0.1 Amps DC
Shunt A 500 amp, 50 mV
Shunt B 100 amp, 10 mV
Warranty 5-year limited warranty standard/Optional 10-year warranty
Mechanical Specifications, 230 Vac/50 Hz Models
Product Name FP1-5 FP1-6
Part Numbers VFX3024E VFX3048E
Dimensions (H x W x D) 33.50” (85.09 cm) x 19.75” (46.26 cm) x 12.87” (32.68 cm)
Weight 98 lb (44.5 kg)
Enclosure and Mounting Plate Materials Aluminum
Mounting Wall Mount (Bracket Included)
AC Inputs 30 Aac Bypass Assembly
AC Outputs 16 Aac Outlet and Breaker
AC and PV terminals Accept #12 AWG to1/0 AWG. Torque: 35 in-lb (4 Nm)
Charge Controller Terminals Accept #12 AWG to 1/0 AWG. Torque: 35 in-lb (4 Nm)
Integrated Communications MATE2 for system operation information; FLEXnet DC Battery Monitor for battery information