Outback Power Systems FLEXpower ONE One Fully Pre-Wired Single Inverter System Installation Manual - Manual (Page 20)

Planning
Clearance and Access Requirements
WARNING: Fire/Explosion Hazard
Do not place combustible or flammable materials within 12 feet (3.7 m) of
the equipment. This unit employs mechanical relays and is not ignition-
protected. Fumes or spills from flammable materials could be ignited by sparks.
IMPORTANT:
Clearance and access requirements may vary by location. Maintaining a 36”
(0.91 cm) clear space in front of the system for access is recommended.
Consult local electric code to confirm clearance and access requirements for
the specific location.
36” (91.4 cm)
(Minimum)
Minimum recommended
clearance in front.
12” (30.5 cm)
(Minimum)
12” (30.5 cm)
(Minimum)
12” (30.5 cm)
(Minimum)
Minimum recommended
clearance above and on sides.
Side View
Figure 6 Clearance and Access Requirements
18
900-0095-01-00 Rev A