DAVIS Weather Monitor II (7440, 7440CS) - Manual (Page 24)

Using the Weather Functions
Page 20 Weather Monitor II
To Display Current Temperatures
1. To display inside temperature, press TEMP.
The inside temperature reading and the word INSIDE appear on the display.
2. To display outside temperature, press TEMP again.
The outside temperature reading and the word OUTSIDE appear on the display.
I NSIDE AND O UTSIDE T EMPERATURE D ISPLAYS
To Change the Unit of Measure
1. Press TEMP once or twice to select inside or outside temperature, as desired.
2. Press UNITS until the desired unit of measure and resolution (1˚F, 0.1˚F, 1˚C, 0.1˚C)
appear in the display.
To Display High and Low Temperatures
1. Press TEMP once or twice to select inside or outside temperature, as desired.
2. Press UNITS to select ˚F or ˚C as desired.
3. Press RECL to display the high.
After a few seconds, the display will show the time the high was recorded, and
then the date it was recorded.
4. Press RECL again to display the low.
After a few seconds, the display will show the time the low was recorded, and
then the date it was recorded.
5. Press any key to exit.
H IGH AND L OW T EMPERATURE D ISPLAYS
To Clear High and Low Temperatures
1. Press TEMP once or twice to select inside or outside temperature, as desired.
2. Press RECL once or twice to select the high or low temperature, as desired.
MPH
N
NE
SW
NW
SE
E W
S
INSIDE
BAROMETRIC
TREND
C
TEMPERATURE
Inside Temperature: 24˚C Outside Temperature: 68.7˚F
F
MPH
N
NE
SW
NW
SE
E W
S
OUTSIDE
BAROMETRIC
TREND
TEMPERATURE
F
MPH
N
NE
SW
NW
SE
E W
S
OUTSIDE LOW
BAROMETRIC
TREND
TEMPERATURE
High Inside Temperature: 27.2˚C Low Outside Temperature: 44˚F
MPH
N
NE
SW
NW
SE
E W
S
INSIDE
HIGH
BAROMETRIC
TREND
C
TEMPERATURE