Press any function key to exit, Setting a normal alarm threshold, Use enter to set the alarm – DAVIS Health EnviroMonitor: Console User Manual
Page 35: Press any function key to save and exit, Outside temperature, Press units as necessary to select ˚f
Alarms
Health EnviroMonitor Manual
Page 43
3. To display the low alarm threshold for a weather condition with two alarms press
ALARM again.
The threshold for the low alarm appears.
4. Press any function key to exit.
Setting a Normal Alarm Threshold
Follow the procedure below for instructions on setting a standard high or low
alarm threshold. Specific instructions for setting the barometric pressure and
dew-point alarm are explained separately below.
1. Press the appropriate key(s) to display the desired weather condition.
2. Press ALARM as necessary to display the desired alarm threshold.
3. Use ENTER to set the alarm.
4. Press any function key to save and exit.
Example of Setting an Alarm Threshold: Low Outside Temperature Alarm
This example shows you how to set the Health EM’s low outside temperature
alarm to 32˚F.
1. Press TEMP as necessary to display outside temperature.
O
UTSIDE
T
EMPERATURE
2. Press UNITS as necessary to select ˚F.
3. Press ALARM twice to display the low alarm threshold.
The high alarm threshold appears first, then the low alarm threshold.
O
UTSIDE
T
EMPERATURE
L
OW
A
LARM
T
HRESHOLD
(N
O
S
ETTING
)