DAVIS Health EnviroMonitor: Console - Manual (Page 21)

Solar Radiation
Health EnviroMonitor Manual Page 29
Selecting Units of Measure
To select the desired unit of measure, simply press UNITS while viewing the
wind speed display. As you press UNITS, the Health EM cycles through the
available units of measure in the following order: MPH, km/h, m/s, kts.
S AMPLE U NITS OF M EASURE
High Wind Speed
The Health EM displays the high wind speed along with the time at which it
occurred and the direction of the high gust. For information on displaying and
clearing highs and lows, see “Highs and Lows” starting on page 40.
Alarms
You may set a high alarm for wind speed. (See “Alarms” on page 42.)
S OLAR R ADIATION
The Health EM displays the current solar radiation intensity and the highest
solar radiation intensity along with the time at which it occurred. Solar radia-
tion intensity is displayed in Watts per square meter (W/m
2 ).
Viewing Solar Radiation
1. To display the current solar radiation intensity, press SUN.
The current solar radiation intensity appears on the right of the display.
C URRENT S OLAR R ADIATION I NTENSITY