DAVIS Health EnviroMonitor: Console - Manual (Page 22)

Using the Health EM
Page 30 Health EnviroMonitor Manual
2. To display the status of the AutoClear function for the high solar radiation intensity,
press SUN again.
If the AutoClear function is enabled, the word O n appears on the right of
the display. If the AutoClear function is disabled, the word O F F appears
on the right of the display. (See “Enabling/Disabling AutoClear” on page 46
for instructions.)
3. Continuing to press SUN will alternate between the two solar radiation displays.
High Solar Radiation Intensity
The Health EM displays the high solar radiation intensity along with the time
at which it occurred. For information on displaying and clearing highs and
lows, see “Highs and Lows” starting on page 40.
B AROMETRIC P RESSURE
The Health EM displays current barometric pressure in inches of Hg (in), milli-
meters of Hg (mm), and hectoPascals (hPa).
Barometric Trend Indicator
The barometric trend indicator, which appears on the bottom right hand corner
of the display, gives you a visual indication of whether barometric pressure is
steady, rising, or falling. The barometric trend indicator updates approximately
every 15 minutes.
• Steady Barometric Pressure
If barometric pressure changed by less than .02 inches of Hg (1.5 mm or
.7 hPa) over the past hour, the steady barometric pressure indicator
appears.
S TEADY B AROMETRIC P RESSURE I NDICATOR