DAVIS Health EnviroMonitor: Console - Manual (Page 25)

Rainfall
Health EnviroMonitor Manual Page 33
Alarms
You may set a special barometric pressure alarm which will alert you to
changes in the barometric pressure. (See “Setting the Barometric Pressure
Alarm” on page 44.)
R AINFALL
You may display the daily rainfall and the total rainfall on the right side of the
display. Whenever you view daily rainfall, the rate of rainfall appears on the
left side of the display. In addition, you may view a daily high rate of rainfall
along with the time at which it occurred. You may display rainfall in either
inches (in) or millimeters (mm). Rate of rainfall is displayed in inches per hour
(in/hr) or millimeters per hour (mm/hr).
Viewing Rainfall
1. To display “daily” rainfall, press RAIN.
The amount of daily rainfall appears on the right of the display. The current
rate of rainfall appears on the left of the display.
D AILY R AINFALL
Daily rainfall represents the amount of rainfall since the last time you (or
AutoClear) cleared the daily rainfall register. For instructions on clearing
daily rainfall, see “Clearing Daily and Total Rainfall” on page 35.
2. To display the total rainfall, press RAIN again.
The total rainfall appears on the right of the display.
T OTAL R AINFALL
Total rainfall represents the amount of rainfall since the last time you cleared
the total rainfall register. For instructions on clearing total rainfall, see
“Clearing Daily and Total Rainfall” on page 35.