DAVIS Health EnviroMonitor: Console - Manual (Page 18)

Using the Health EM
Page 26 Health EnviroMonitor Manual
Low Wind Chill
The Health EM displays the low wind chill along with the time at which it
occurred. For information on displaying and clearing highs and lows, see
“Highs and Lows” starting on page 40.
Alarms
You may set a low alarm for wind chill. (See “Alarms” on page 42.)
O UTSIDE AND I NSIDE T EMPERATURE
The Health EM displays the current outside and inside temperature. In addi-
tion, you may view the high and low outside and inside temperatures along
with the time at which they occurred. You may display outside and inside tem-
perature in ˚F or ˚C and at a resolution of either 0.1˚ or 1˚.
Viewing Temperature
1. To display the current outside temperature, press TEMP.
The current outside temperature appears on the right of the display.
C URRENT O UTSIDE T EMPERATURE
2. To display the current inside temperature, press TEMP again.
The current inside temperature appears on the right of the display.
C URRENT I NSIDE T EMPERATURE
3. To display the status of the AutoClear function for high and low outside and inside
temperature, press TEMP again.
If the AutoClear function is enabled, the word O n appears on the right of
the display. If the AutoClear function is disabled, the word O F F appears
on the right of the display. (See “Enabling/Disabling AutoClear” on page 46
for instructions.)
Note: You cannot enable/disable the AutoClear function separately for outside and inside temperature.
These two functions are “linked” and AutoClear for them must be either enabled or disabled
together.