DAVIS Health EnviroMonitor: Console - Manual (Page 29)

Time
Health EnviroMonitor Manual Page 37
Selecting Units of Measure
To select the desired unit of measure for dew-point, simply press UNITS
while viewing any dew-point display. As you press UNITS, the Health EM
alternates between ˚F and ˚C. All temperature information (including appar-
ent temperature, temperature, and wind chill) will appear in the units of
measure you select.
S AMPLE U NITS OF M EASURE
High and Low Humidity
The Health EM displays the high and low outside and inside humidity along
with the time at which it occurred. For information on displaying and clearing
highs and lows, see “Highs and Lows” starting on page 40.
Alarms
You may set a high and a low alarm for both outside and inside humidity. You
may set a special alarm for dew-point which alerts you if temperature comes
within 2˚F (1˚C) of dew-point. (See “Alarms” on page 42.)
T IME
The Health EM displays the current time, date, year, and the time at which the
Health EM performs the AutoClear each day. You may display time in either
12-hour (AM/PM) or 24-hour (24h) format. You may display date in either
Month-Day (Mo-Day) or Day.Month (Day.Mo) format. You may set the time,
date, year, and the time at which you wish the Health EM to perform the Auto-
Clear each day.
Displaying Time Functions
1. To display the current time, press TIME.
The current time appears on the right of the display.
T IME