Equus 3140 - Scan Tool CanOBD2&1 Kit - Manual (Page 92)

90 CanOBD2&1
E
GM OBD1 Systems
CODE RETRIEVAL PROCEDURE
Some DLCs have a plastic cover that must be removed before
connecting the CanOBD2&1 Scan Tool's cable connector.
2. Connect the CanOBD2&1 Scan Tool
cable (with the GM Connector Cable
Adaptor attached) to the CanOBD2&1
Scan Tool, then connect the adaptor to
the vehicle’s DLC.
Press the
POWER/LINK button to turn the
CanOBD2&1 Scan Tool ON, then press the ENTER/LD button
to continue.
3. Select the model year of the vehicle from which you wish to retrieve
codes:
If a previous vehicle selection is currently saved in the
CanOBD2&1 Scan Tool's memory, the "Current Selection/
Select New Vehicle" menu displays. If no previous vehicle
selection is stored in the CanOBD2&1 Scan Tool's memory,
"Select Vehicle Year" menu displays.
Use the and buttons, as necessary, to make menu
selections.
■ To retrieve DTCs from the vehicle selection currently in the
CanOBD2&1 Scan Tool’s memory:
- From the “Current Selection/
Select New Vehicle” screen, high-
light Current Selection, turn igni-
tion key ON (DO NOT start
engine) and press the ENTER/FF
button.
- Proceed to step 5 to continue.
■ To retrieve DTCs from a new vehicle:
- From the “Current Selection/
Select New Vehicle” screen, high-
light Select New Vehicle and
press the ENTER/LD
button;
the “Select Vehicle Year” menu dis-
plays.
- Highlight the desired year, then
press the ENTER/LD button;
the “Enter the 8th digit of VIN”
menu displays.
- Highlight the 8th digit of the vehi-
cle’s VIN, then press the
ENTER/LD
button.